Inconel 625

Inconel 625 Stockist and Supplier

INCONEL nickel-chromium combination 625 (UNS N06625/WNr 2.4856) is utilized for its high quality, superb fabric capacity (counting joining), and extraordinary consumption resistance. Administration temperatures range from cryogenic to 1800°F (982°C).
Inconel 625 is a corrosion and oxidation resistant nickel alloy that is used both for its high strength and outstanding aqueous corrosion resistance. Its outstanding strength and toughness is due to the addition of niobium which acts with the molybdenum to stiffen the alloy's matrix. Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability and is frequently used to weld AL-6XN. This alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Some typical applications Inconel 625 is used in are chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.

Rod, Bar, Wire and Forging Stock:  ASTM B 446; ASME SB 446 (Rod & Bar), ASTM B 564; ASME SB 564 (Forgings);  AMS 5666 (Bar, Forgings, & Rings); AMS 5837 (Wire), ISO 9723 (Rod & Bar), ISO 9724 (Wire), ISO 9725 (Forgings), VdTÜV 499 (Rod & Bar), BS 3076NA21 (Rod & Bar), EN 10095 (Rod, Bar, & Sections), DIN 17752 (Rod & Bar), ASME Code Case 1935 (Rod, Bar, & Forgings), DIN 17754 (forgings), DIN 17753 (Wire).

Plate, Sheet and Strip: - ASTM B 443; ASTM SB 443 (Plate, Sheet & Strip), AMS 5599; 5869; MAM 5599 (Plate, Sheet & Strip), ISO 6208 (Plate, Sheet & Strip), VdTÜV 499 (Plate, Sheet & Strip), BS 3072NA21 (Plate & Sheet), EN 10095 (Plate, Sheet & Strip), DIN 17750 (Plate, Sheet & Strip), ASME Code Case 1935.

Pipe & Tube: ASTM B 444; ASTM B 829; ASME SB444; ASME SB 829 (Seamless Pipe & Tube), ASTM B704; ASTM B 751; ASME SB 704; ASME SB 751 (Welded Tube), ASTM B705; ASTM B 775; ASME SB 705; ASME SB 775 (Welded Pipe), ISO 6207 (Tube), AMS 5581 (Seamless & Welded Tube), VdTÜV 499 (Tube), BS 3074NA21 (Seamless Pipe & Tube), DIN 17751 (Tube), ASME Code Case 1935.

Other Product Forms: ASTM B 366; ASME SB 366 (Fittings), ISO 4955A (Heat Resisting Steels & Alloys), DIN 17744 (Chemical composition of all product forms).

Specification of Inconel Alloy 625:

STANDARDS :
  • AMS: 5599, 5666
  • MS: 5837
  • ASME: SB 443 Gr 1, SB 446 Gr 1
  • ASTM: B 443 Gr 1, B 446 Gr 1
  • EN: 2.4856
  • ISO: 15156-3
  • NACE: MR0175-3
  • UNS: N06625
  • Werkstoff: 2.4856
  • MATERIALS :
  • W.NR 2.4856
  • UNS N06625
  • AWS 012
  • Features :
  • Highly Resistant to Corrosion
  • High Strength
  • Toughness
  • Tight Tolerance
  • Applications :
  • Pollution control equipment
  • Jet engine parts
  • Heat exchangers
  • Pressure valves
  • Chemical Composition of Inconel Alloy 625:

    Element Inconel 625
    Ni 58.0
    Cr 20.0 – 23.0
    Fe 5.0 max
    Mn 0.50 max
    Al 0.40 max
    Ti 0.40 max
    C 0.10 max
    Mo 8.0 – 10.0
    Co 1.0 max
    Nb + Tba 3.15 – 4.15
    S 0.015 max
    Si 0.50 max
    Cu 1.0 max
    P 0.015 max
    S 0.015 max

    Mechanical Properties of Inconel Alloy 625:

    Density 8.4 g/cm3
    Melting Point 1350 °C (2460 °F)
    Tensile Strength Psi – 135,000 , MPa – 930
    Yield Strength (0.2%Offset) Psi – 75,000 , MPa – 517
    Elongation 42.5 %