Nickel 200 / Nickel 201

Nickel 200 / Nickel 201

Nickel 200 and Nickel 201 are strong arrangement fortified, monetarily unadulterated fashioned materials with great mechanical properties over an extensive variety of temperatures and amazing imperviousness to numerous corrosives, specifically hydroxides. Nickel 201 was a change of 200 to control carbon (.02 max) which keeps it from being embrittled by intergranular hastens at temperatures of 600° F to 1400° F in numerous procedures. Regularly, the natural limitations of both, nickel 200 and nickel 201, are joined into one, double affirmed science bringing about a solitary compound with the desired qualities of both composites, Nickel 200/201.

Nickel 201 Alloy is like Nickel 200 Alloy and is a low carbon alteration of the 200 Alloy. It has a low toughened hardness and low work-solidifying rate. The individuals who use Nickel 201 Alloy think that its attractive in profound drawing, turning, and begetting. It expansion, it can be connected to consumption safe hardware including yet not constrained to: acidic evaporators, spun anodes, and research center pots.

As to the contrast between Nickel 200 and Nickel 201, Nickel 201 conveys lower carbon content bringing about lower hardness. The lower carbon content in Nickel 201 likewise makes the material more impervious to graphite furthermore helps in forestalling embitterment. Nickel 200 is by and large utilized for administration up to 570° F (300 °C) to 600° F, in the mean time Nickel 201 is for the most part endorsed for administration up to 1200° F to 1230°F.

Features :

1. Highly resistant to various reducing chemicals
2. Outstanding resistance to caustic alkalis
3. Good electrical and magnetostrictive properties
4. High electrical and thermal conductivity

Specification

Grades :	Nickel Alloy 200 (UNS No. N02200) Sheets & Plates, 2.4060, 2.4066 Nickel Alloy 201 (UNS No. N02201) Sheets and Plates, 2.4060, 2.4066
Size :	15NB to 150NB In
Form :	Bar,Wire,Sheet,Plate,Fitting
Finish :	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Applications :	Manufacture and handling of sodium hydroxide, particularly at temperature above 300C. Production of viscose rayon. Manufacture of soap. Analine hydrochloride production and in the chlorination of aliphatic hydrocarbons such as benzene, methane and ethane. Manufacture of vinyl chloride monomer.

Chemical Composition

Ni	99.0% min
C	0.15% max
Mn	0.35% max
S	0.010% max
Si	0.35% max
Cu	0.25% max
Fe	0.40%

Physical Properties

Density	0.321 lb/in.3
Melting Point	1435-1446°C (2615-2635°F)
Thermal Conductivity	487 Btu•in/ft2•h•°F
Electrical Resistivity	58 ohm•circ mil/ft

Nickel Alloy Ni-201 Standards

Rod and bar	ASTM B 160, ASME SB 160, DIN 17752, ISO 9723
Pipe and Tube	ASTM B 161, ASME SB161, B 163/ SB 163, B 725/ SB 725, B730/ SB 730, B 751/ SB 751, B775/ SB 775, B 829/ SB 829, DIN 17751, ISO 6207
Plate, Sheet & Strip	ASTM B 162, ASME SB 162, DIN 17750, ISO 620
Fittings	ASTM B 366, ASME SB 366
Forgings	ASTM B 564, ASME SB 564, ISO 9725, DIN 1775
Wire	DIN 17753, ISO 972