Aluminium Alloy 6082 / HE30

Aluminium Alloy 6082 / HE30 Stockist & Supplier

Shree Sambhav Alloys is one of the leading Stockist & Supplier of Aluminium Alloy 6082/HE30. Aluminium alloy 6082 / HE30 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Aluminium Alloy 6082 / HE30 is known as a structural alloy. In plate form, Aluminium Alloy 6082 / HE30 is the alloy most commonly used for machining. As a relatively new alloy, the higher strength of 6082 / HE30 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy.
It is difficult to produce thin walled, complicated extrusion shapes in aluminium alloy 6082. The extruded surface finish is not as smooth as other similar strength alloys in the 6000 series. In the T6 and T651 temper, aluminium alloy 6082 / HE30 machines well and produces tight coils of swarf when chip breakers are used.
We satisfy our clients with our best and unique range of Aluminum Alloy 6082 / HE30. Offered products are inspected in terms of quality so as to deliver a defect free range. These products are manufactured by utilizing top notch material and modern technology as per the predefined standards. Our products are tested by our quality experts in order to make certain its flawlessness before delivering to customers.

Applications of Aluminium Alloy 6082 / HE30:

Aluminium Alloy 6082 / HE30 is typically used for heavy duty structures in:

1. Highly stressed applications
2. Trusses
3. Bridges
4. Cranes
5. Transport applications
6. Ore skips
7. Beer barrels
8. Milk churns

ALLOY DESIGNATIONS

Aluminium alloy 6082 / HE30 also corresponds to the following standard designations and specifications but may not be a direct equivalent.

AA6082

HE30

DIN 3.2315

EN AW-6082

ISO: Al Si1MgMn

A96082

Chemical Composition Of Aluminium Alloy 6082 / HE30 :

Chemical Element	% Present
Manganese (Mn)	0.40 - 1.00
Iron (Fe)	0.0 - 0.50
Magnesium (Mg)	0.60 - 1.20
Silicon (Si)	0.70 - 1.30
Copper (Cu)	0.0 - 0.10
Zinc (Zn)	0.0 - 0.20
Titanium (Ti)	0.0 - 0.10
Chromium (Cr)	0.0 - 0.25
Other (Each)	0.0 - 0.05
Others (Total)	0.0 - 0.15
Aluminium (Al)	Balance

Physical Property Of Aluminium Alloy 6082 / HE30 :

Physical Property	Value
Density	2.70 g/cm³
Melting Point	555 °C
Thermal Expansion	24 x10^-6 /K
Modulus of Elasticity	70 GPa
Thermal Conductivity	180 W/m.K
Electrical Resistivity	0.038 x10^-6 Ω .m

Typical Mechanical Properties of Aluminium Alloy 6082 / HE30 :

Spec: BS EN 485-2:2008
Plate - 6.00m to 12.5mm

Mechanical Property	Value
Proof Stress	255 Min MPa
Tensile Strength	300 Min MPa
Elongation A50 mm	9 Min %
Hardness Brinell	91 HB

Spec: BS EN 485-2:2008
Plate - 12.5mm to 100.00mm

Mechanical Property	Value
Proof Stress	240 Min MPa
Tensile Strength	295 Min MPa
Hardness Brinell	89 HB

Spec: BS EN 485-2:2008
Plate - 12.5mm to 100.00mm

Mechanical Property	Value
Proof Stress	240 Min MPa
Tensile Strength	275 Min MPa
Hardness Brinell	84 HB
Elongation A	6 Min %